|
CA-110/220 Specifications
1.03 - Section Includes
A. Type: Sectional doors are to be
Models CA-110 and CA-220 as manufactured by
Haas Door Company.
B. Operation: To be manual push-up
counterbalanced, chain hoist, or electric
operation (supplied by others).
C. Mounting: To be interior face
mounted on a prepared surface.
1.04 - Related Work
A. Opening preparation
miscellaneous or structural steel, access
panels, and finish or field painting are in
the scope of work of other sections or
trades
Part 2 - Product
2.01 - Materials/Construction
A. Sections: Shall be 1 3/4" thick
full tubular aluminum framework with .125"
wall thickness at all hardware attachment
points. Vertical stiles and hotizontal rails
shall be miter cut and joined with internal
steel 1/4" thru-bolts." Horizontal meeting
rails shall have ship-lap overlap joints.
B. Door Panels: Shall be 18-gauge
stucco embossed or smooth clear anodized
aluminum sheet (6063T6 alloy/.055" thick)
set in a continuous vinyl snap-in glazing
bead.
C. Glass Panels: Shall be set in a
continuous vinyl gasket and held in place by
inside vinyl snap-in glazing bead. For 1/2"
thick tempered glazing, aluminum snap-in
bead is used. (Note: Glazing is 1/8" or 1/4"
acrylic or 1/2" tempered.)
D. End Stiles: Shall be integral
extruded aluminum framework.
E. Intermediate Reinforcing: Shall be
integral extruded tempered aluminum
framework, to provide reinforcing for
attachment of various hardware.
F. Bottom Section: Weatherstrip to be
a "U"-shaped astragal of flexible extruded
vinyl.
G. Finish Coat: Shall be clear
anodized aluminum.
2.02 - Counterbalance
A. Spring Counter Balance: Shall
be factory calibrated springs to match site
specifications. Shall be helical
torsion-type made from oil-tempered wire to
provide a minimum of 10,000 cycles.
B. Spring Options: To be helically
wound, oil-tempered springs.
C. Assembly: Shall be contained on a
continuous steel shaft retained in ball
bearing brackets, with high-strength
galvanized aircraft cable with a minimum 7
to 1 safety factor.
2.03 - Tracks
A. Vertical Tracks: Shall be a
minimum of 16-gauge galvanized steel tapered
and mounted to provide wedge-type-sealing
action (2" track or 3" track depending on
door size).
B. Horizontal Tracks: Shall be a
minimum of 16-gauge galvanized steel
reinforced with a minimum of 13-gauge
galvanized angles, as required (2" track or
3" track depending on door size).
2.04 - Locking
A. Slide Bar Lock: Shall be an
inside spring-loaded lock, mounted on the
end stile and shall engage a slot in the
vertical track.
2.05 - Hardware
A. Hinges: Shall be manufactured
of hot-dipped galvanized steel, 14-gauge
minimum.
B. Rollers: Shall be full floating
ball bearing case hardened steel races,
mounted to fit the slope of the track (2" or
3" suite the track).
Part 3 - Execution
3.01 - Installation
A. Installation: Shall be by a
Haas Door Company authorized representative
and shall comply with all relevant Haas Door
Company standards and instructions.
Part 4 - Warranty
4.01 - Unlimited Warranty
Haas Door Company Warrants each door and
all component parts to be free from defects
in material and workmanship for a period of
one (1) year from the date of delivery to
the original purchaser.
Optional Features
A. COLOR ANODIZING
B. CUSTOM PAINTING (COLOR MATCHING)
C. SPECIAL GLAZING MATERIALS
D. 1/2" INSULATED PANELS AND GLAZING
E. DOUBLE END STILES
F. 3" or 4" EXHAUST PORT
G. THREE SECTION PASS DOORS
H. FOUR SECTION PASS DOORS
I. ADDITIONAL STRUTTING
J. CAM SAFETY DEVICE
K. SPRING BUMPERS
L. CHAIN HOIST
M. EXTENDED CYCLE TORSION SPRINGS
N. EXTENDED TRACK
O. HIGH-LIFT AND VERTICAL LIFT TRACK
Sizes up to:
A. CA-110: 16'-2"W X 16'1"H
B. CA-220: 24'2"W X 20'1"H
|
